This board will enable you to integrate and use the SigFox LPWan network into your IOT project design, providing simple data transmission feature.
Thanks to the small dimension of the SFM10R4 Wisol module, an ultra-small foot-print breakout board design was possible.
The design of the breakout allows versatile usages from the development of your prototype to the mass production of your project. Indeed, the layout of input/output pin is such that you can use the standard module features with the breakout board positioned vertically as a Single Inline Package module (SIP). Therefore, the integration into your PCB design is possible and facilitated.
The SigFox network allows sending 12 bytes messages long.
A credit of sending 140 messages per day and receiving 4 messages per day is included with the card.
The module is controlled with serial AT commands sent on TX/RX pins.
Below is the communication specification and AT commands to use.
Serial communication: 9600 bauds, 8bits, 1 stop bit, no parity
|Get Module ID:||AT$I=10|
|Get PAC code:||AT$I=11|
|Send a SIGFOX message:||AT$SF=XXXXXXXXXXXX (Hexadecimal value)|
|Send a SIGFOX message with downlink frame:||AT$SF=XXXXXXXXXXXX,1 (Hexadecimal value)|
For Raspberry Pi : https://github.com/adrien3d/IO_WSSFM10-RPi
For Arduino: https://github.com/adrien3d/IO_WSSFM10-Arduino
|Country of Manufacture||France|