(+33) 972 56 22 00
CONTACT US

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Pack 10 Modules Wisol SFM10R3 pour le réseau Sigfox Pack 10 Modules Wisol SFM10R3 pour le réseau Sigfox

Pack 10 Modules Wisol SFM10R3 for Sigfox network

Be the first to review this product

Quick Overview

Wisol module WSSFM10R3AT (Japan) sold by quantity of 10. Integrate Sigfox technology at low cost!

Contact us for higher quantities
Excl. Tax: €28.40 Incl. Tax: €34.08

Availability: In stock

  • Buy 5 for €25.00 (€30.00 incl. tax) each and save 12%

Details

Please contact us if you need higher quantities.

Region 3 (Japan) SigFox module from Korean manufacturer Wisol, reference SFM10R3 or WSSFM10R3AT.
This module will allow you to integrate and use the SigFox LPWan network in your IOT project design, offering a very simple data transmission functionality.

Sigfox Verified
  • Ultra-Small foot-print 13mm x 15mm x 2.21mm
  • Simple control by AT commands
  • Sigfox Verified certified module

 

Thanks to its small size, the Wisol SFM10R2 module allows a very small board design compared to the existing Sigfox modules on the market.

 

Sigfox logo

The SigFox network allows sending 12 bytes messages long.
The Sigfox network is nationaly available in many European countries.
Please check the coverage here :  http://www.sigfox.com/en/coverage

 

The Kit includes

  • 10 x modules SFM10R3 Wisol

 

Technical specificatins:

  • Power supply: +1.8V~+3.6V
  • Tx current: 60mA (Max)
  • Current Rx: 15mA (Max)
  • Communiation: Serial UART
  • Protocol: AT Command
  • Type: SMD
  • PCBA Size: 13mm x 15mm x 2.21mm
  • Chipset : AX-SFJK-1-01/ ON Semiconductor
  • Tx Frequency : 921.0MHz
  • Rx Frequency : 922.2MHz
  • Data rate : TX/100bps - RX/600bps
  • Tx Output Power : +14dBm(max.)@600bps
  • Rx Sensitivity : -127dBm(min.)@600bps

 

Communication commands:

The module is controlled with serial AT commands sent on TX/RX pins.
Below is the communication specification and AT commands to use.

Serial communication: 9600 bauds, 8bits, 1 stop bit, no parity
AT commands:

Communication test: AT
Get Module ID: AT$I=10
Get PAC code: AT$I=11
Send a SIGFOX message: AT$SF=XXXXXXXXXXXX (Hexadecimal value)
Send a SIGFOX message with downlink frame: AT$SF=XXXXXXXXXXXX,1 (Hexadecimal value)

Additional Information

SKU PE0001920
Country of Manufacture South Korea
Manufacturer Wisol