As low as €0.00 €0.00
Out of stock
The N8-LRW is a radio module using LoRa modulation that guarantees high immunity to interference, and a very low sensitivity in reception. These characteristics which make it possible to reach a very long range.
The N8-LRW is a dual-mode module, capable of working on both LoRaWAN and Lora M2M. It can be operated under M2M or LoRaWAN modes, or under both modes simultaneously.
Under LoRaWAN, the module can be used in either class A or class C. Under Lora M2M, the module can be operated in ENSI or FCC.
The N8-LRW module is pin-to-pin compatible with other modules from ATIM. It has taken over all features of the ARM N8-LW model. Other UART / BRIDGE mode, the N8-LRW embarks a so-called "Standalone" mode, enabling users to directly connect it to sensors without going through an external microcontroller. You will find usage examples on a note app.
The Standalone mode allows for the integration of a new connected device in a very short time, even for users not familiar with embedded programming.
The Standalone mode can be used under both LoRaWAN and LoRa P2P.not familiar with embedded programming.
Frequency |
868MHz |
---|---|
Technology |
LoRaWAN (Class A and Class C) |
Output Power RF |
Ajustable from 2 to 20dBm |
Baudrate RF |
100bps to 10000bps |
Interface |
UART 2 wires + flow control by RTS/CTS |
Protocol |
Transparent |
Consumption |
Rx (22mA), Sleep (0.6µA), Tx (50mA) |
Wake up |
1 x digital entry |
Pin out casing |
25 pins half circle, 1,8mm pitch |
Dimensions |
30mm x 18mm x 2.5mm |
Normalisation |
EN 300 220-1 V2.4.1, EN 300 220-2 V2.4.1, EN301489-1 V1.9.2, EN301489-3 V1.4.1, EN61000-6-2 : 2005, EN62311:2008, Récepteur Classe 2 |
Environnement |
Humidity : 0 to 95% no condensation, Temp. fonct/stock : -20 à +85°C / -40 à +85°C |
Reference |
ARM-N8-LRW |
"XBee®" format carrier board This carrier board use the serial connection of the connector to communicate with the LoRaWan module. You can order the antenna with the carrier board (see ordering options). |
|
868Mhz 1/2 wave Antenna for the carrier boards (in option) | |
To help you in your develeppment, please see below the library links:
Github: https://github.com/atim-radiocommunications/armapi
Github Pages: http://atim-radiocommunications.github.io/armapi/
HTML Documentation: http://atim-radiocommunications.github.io/armapi/doc/html/index.html
SKU | PB0000960 |
---|---|
Country of Manufacture | France |