Kit LoRaWAN & Sigfox Breakout board LSM100A + 868Mhz Antenna

€27.48 €22.90

Multi-network LoRa & SigFox breakout board kit based on the SJI WSLSM100A module (EMEA). Design your LPWAN multi-network-compatible IOT prototype quickly and easily.

Availability: In stock

SKU

PB0004430

Buy 50 for €26.64 €22.20 each and save 3%
Buy 100 for €26.10 €21.75 each and save 5%

Details

Breakout LoraWan and Sigfox BRKLSM100A

This quick-to-use development board is based on the SJI LSM100A module. This HAT will enable you to integrate LoraWan and/or Sigfox LPWAN networks into your IOT project design. The LSM100A is a compact, low-power two-way radio module, optimized for use in the 863 MHz ~ 928 MHz ISM bands.

This high-performance module supports LoRa(TM) & Sigfox wireless communication protocols, and can be converted to LoRa or Sigfox mode using simple AT commands.

Product features :

Dimensions	• 14 x 15 x 2,8 mm. (Typ.)
Modulation technology	• LoRa(TM) & Sigfox
Sensitivity	• Up to -136dBm@LoRa(BW=125KHz, SF=12), 124dBm at Sigfox (0.6Kbps)
Interface	• UART
Commands	• AT
Transceiver	• Low-power long-range transceiver operating in the sub-1 GHz ISM band
Supply voltage range	• 1,8 to 3,6V
RF interface	• Optimized to 50 Ω
Output power level	• Up to +15dBm
Current	• Tx : 27mA • Rx : 5mA
Chip	• STM32WLE5CC
API Version	• Possibility to integrate own code

Applications :

• Wireless alarm and security systems

• Industrial monitoring and control

• Detect soil moisture and temperature

• Automated meter reading

• Home automation

Kit contents :

• 1x BRKLSM100A Breakout Board

• 1x Articulated Antenna 1/2 wave 868Mhz

• 1x UFL <> RP-SMA 100mm Cable

• 1x Male Connector, Through Hole, 8 Contacts, 1 row, Right Angle, pitch 2.54, gold plated

• 1x Male Connector, Through Hole, 8 Contacts, 1 Row, Pitch 2.54, Gold Plated

• 1x Access to your data via the SigFox portal

RF Characteristics LoRa(TM):

Frequency Range (1) : 863MHz - 928MHz

• EU863-870
• AS923
• KR920-923

RF Characteristics Sigfox :

Frequency Range (1) : 863MHz - 928MHz

• RC1 868.13±0.096
• RC3 923.20±0.096

Communication commands :

The module is controlled by AT serial commands sent to TX / RX pins. Please find below the communication specification and the AT commands to be used.

• Serial communication: 9600 baud, 8 bits, 1 stop bit, no parity

Communitation Test	AT
Get LoRa Key	AT+APPEUI=? AT+NWKKEY=? AT+APPKEY=? AT+NWKSKEY=? AT+APPSKEY=? AT+DEUI=? AT+NWKID=?
Send LoRa message	AT+SEND=port:ack:data <Port >:[ 1 ~ 199 ] <Ack >:[ 0: unconfirmed, 1: confirmed]
Get ID sigfox from the module	AT$ID
Get code PAC sigfox from the module	AT$PAC
Send Sigfox message	AT$SF=payload,opt_responsewaited,opt_txflag <payload>: [ 12 bytes maximum in ASCII format (24 ASCII characters max) ] <opt_responsewaited>: [ 0: no response waited (default) ] [ 1: response waited ] <opt_txflag txflag>: [ 0: one Tx frame sent ] [ 1: three Tx frames sent (default) ]
Change mode Lora <-> Sigfox	AT+MODE=mode <mode>:[ 0: SigFox, 1: LoRa