Official Raspberry Pi 4 15,3W USB-C power supply

Official USB power supply C for the Raspberry Pi 4 with European power outlet

This power supply is intended to properly power the latest Raspberry Pi 4 Model B card model
This power supply is equipped with a 1.5 m cable and a USB-C plug.

• 5.1V / 3.0A DC output
• 96-264Vac operating input range
• Short circuit, overcurrent and over temperature protection
• 1.5m 18 AWG captive cable with USB-C output connector

Technical characteristics:

Output

• Output voltage: +5.1V DC
• Minimum load current: 0A
• Nominal load current: 3.0A
• Maximum power: 15.3W
• Load regulation: ±5%
• Line regulation: ±2%
• Ripple & noise: 120mVp-p
• Rise time: 100ms maximum to regulation limits for DC outputs
• Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
• Protection: Short circuit protection
• Overcurrent protection
• Over temperature protection
• Efficiency: 81% minimum (output current from 100%, 75%, 50%, 25%)
• 72% minimum at 10% load
• Output cable: 1.5m 18AWG
• Output connector: USB Type-C

Input

• Voltage range: 100-240Vac (rated)
• 96-264V
• ac (operating)
• Frequency: 50/60Hz ±3Hz
• Current: 0.5A maximum
• Power consumption (no load): 0.075W maximum
• Inrush current: No damage shall occur and the input fuse shall not blow