Pack 10 Modules Wisol WSSFM11R2D for Sigfox network

Please contact us if you need higher quantities.

Region 2 and 4  (Argentina, Australia, Brazil, Chile, Colombia, Costa Rica, Ecuador, El Salvador, Guam, Honduras, Hong Kong, Mexico, New Zealand, Panama, Peru, Singapore, Taiwan, Thailand, United States) SigFox module from Korean manufacturer Wisol, reference SFM11R2D or WSSFM11R2DAT.
This module will allow you to integrate and use the SigFox LPWan network in your IOT project design, offering a very simple data transmission functionality.

Ultra-Small foot-print 13mm x 20mm x 2.3mm Simple control by AT commands Sigfox Verified certified module

Thanks to its small size, the Wisol SFM11R2D module allows a very small board design compared to the existing Sigfox modules on the market.

The SigFox network allows sending 12 bytes messages long. The Sigfox network is nationaly available in many European countries. Please check the coverage here :  http://www.sigfox.com/en/coverage

The Kit includes

• 10 x modules SFM11R2D Wisol

Technical specificatins:

• Power supply: +2.7V~+3.6V
• Tx current: 200mA (Typ)
• Current Rx: 40mA (Max)
• Communiation: Serial UART
• Protocol: AT Command
• Type: SMD
• PCBA Size: 13mm x 20mm x 2.3mm
• Chipset : AX-SFUS-1-01/ ON Semiconductor
• Tx Frequency : 902.2MHz / 920.8Mhz
• Rx Frequency : 905.2MHz / 922.3Mhz
• Data rate : 600bps
• Tx Output Power : +24dBm(max.)@600bps
• Rx Sensitivity : -129dBm(min.)@600bps

Communication commands:

The module is controlled with serial AT commands sent on TX/RX pins.
Below is the communication specification and AT commands to use.

Serial communication: 9600 bauds, 8bits, 1 stop bit, no parity
AT commands: