Raspberry Pi Compute Module 3 Dev Kit

Raspberry Pi Compute Module 3 Development Kit

Le Raspberry Compute Module (Version 3) de Raspberry Pi est une version du Raspberry Pi qui se limite au processeur et à la RAM, le tout intégré sur un module SoMs (System on Modules), mécaniquement compatibles avec les ports DDR2-SODIMM, trés largement répandus.

The Compute Module 3 Development Kit will make it easy for you to start your development. It includes a Compute Module I / O card version 3 (CMIO V3), a Compute Module 3 and an official power supply unit.

This Compute Module I / O card version 3 (CMIO V3) is also equipped with an SD card adapter to support the Compute Module 3 Lite variant and thus add an SD card of your choice.

To start your project, simply connect the Compute Module 3 provided in the I / O board. The CMIO V3 provides the power to configure Raspbian and program the module.

The Compute Module 3 (CM3) takes the components of the Raspberry Pi 3 (except the WiFi function) and integrates them on a small card in SO-DIMM format DDR2, in order to offer a very advantageous quality-price ratio.

These modules are suitable for designers who are looking for the features of the Raspberry Pi 3 but need a smaller size (67.6 x 31 mm) for their built-in designs. They provide flexibility and scalability for the development of professional applications.

The Raspberry Compute Module (Version 3) is a SoM (System on Module) containing a 1.2MHz processor BCM2837 SoC (System on Chip) with 1 GB of LPDDR2 RAM. Also equipped with additional input / output (I / O) interfaces.

The CM3 version is equipped with a 4GB Flash eMMC, unlike the CM3L version that does not, leaving the choice of storage to the most demanding.

Technical specifications:

Compute Module:

• SoC Broadcom BCM2837 featuring a four core ARM Cortex A53 1.2GHz 64bit
• VideoCore IV® graphics processor
• 1 GB RAM memory (LPDDR2)
• 4 GB eMMC Embedded Flash Memory
• 200-pin SODIMM connector
• Spindle compatible with previous version
• Dimensions: 67.6 mm x 30mm

I / O card:

• 1 GPIO port of 46 pins
• 2 micro USB type B connectors (power and boot)
• 1 USB type A connector
• 2 CSI ports for camera modules
• 2 DSI ports for LCD display
• 1 HDMI port
• 1 SD card slot

Power Supply (Official RaspBerry Pi)

• Power supply 2.5 A 5.1 V
• 1.5 m cable
• Short-circuit, over-current and over-current protection
• Low standby power consumption
• Class II double insulation

Find more information and documentation to help you during your development with this module on the official website Raspberrypi.org