Sigfox WSSFM10R1AT module from Seong Ji - Wisol

€4.46 €3.72

Wisol module WSSFM10R1AT (Europe+Middle East+Africa+India+Russia)

Compatible RC1 + RC6 + RC7

Modules sold in minimum quantities of 10.

Availability: Out of stock

SKU

WSSFM10R1AT

Buy 50 for €3.92 €3.27 each and save 12%
Buy 500 for €3.66 €3.05 each and save 18%
Buy 900 for €3.52 €2.93 each and save 21%

Notify me when this product is in stock

Details

Sigfox WSSFM10R1AT module from Seong Ji - Wisol

Region 1 (Europe+Middle East+Africa) SigFox module but also compatible for regions RC6 (india) and RC7 (Russia) from Korean manufacturer Seong-Ji - Wisol, reference SFM10R1 or WSSFM10R1AT.

This module will allow you to integrate and use the SigFox LPWan network in your IOT project design, offering a very simple data transmission functionality.

Ultra-Small foot-print 13mm x 15mm x 2.21mm
Simple control by AT commands
Sigfox Verified certified module

Thanks to its small size, the Wisol SFM10R1 module allows a very small board design compared to the existing Sigfox modules on the market.

The SigFox network allows sending 12 bytes messages long.
The Sigfox network is nationaly available in many European countries.
Please check the coverage here : http://www.sigfox.com/en/coverage

Technical specificatins:

Power supply: +1.8V~+3.6V
Tx current: 60mA (Max)
Current Rx: 15mA (Max)
Communiation: Serial UART
Protocol: AT Command
Type: SMD
PCBA Size: 13mm x 15mm x 2.21mm
Chipset : AX-SFEU-1-01/ ON Semiconductor
RF Frequencies
- RC1 Tx: 868.130 MHz / Rx: 869.525MHz
- RC6 Tx: 865.2 MHz / Rx: 866.3 MHz
- RC7 Tx: 868.8 MHz / Rx: 869.1 MHz
Tx Output power : +14dBm(max)
Rx Sensitivity : -127dBm@600bps

Communication commands:

The module is controlled with serial AT commands sent on TX/RX pins.
Below is the communication specification and AT commands to use.

Serial communication: 9600 bauds, 8bits, 1 stop bit, no parity
AT commands:

Communication test:	AT
Get Module ID:	AT$I=10
Get PAC code:	AT$I=11
Send a SIGFOX message:	AT$SF=XXXXXXXXXXXX (Hexadecimal value)
Send a SIGFOX message with downlink frame:	AT$SF=XXXXXXXXXXXX,1 (Hexadecimal value)

Specifications:

Absolute Maximum Ratings
Parameter	Rating		Unit
Operating temp.	-30 to +85		°C
Storage temp.	-40 to +125		°C
DC Characteristics
Parameter	Min	Typ.	Max	Unit
Input Voltage	1.8	3.3	3.6	V
Tx Current (@14dB setting)		54	55	mA
Rx Current		15	Your measured value	mA
I/O Specifications
Parameter	Min	Typ.	Max	Unit
supply voltage	1.8		3.6	V
High level input voltage	2.0			V
Low level input voltage			0.8	V